We are moving from Cisco APs to Aerohive, and by default NPM populates the wireless view with the Aerohive APs. However there are several problems:
1) The APs are detected as model 20 even though they are all model 120. We may end up with other models in the future.
2) There is no client information displayed for any of the APs in the Wireless view. Using the Orion Universal Device Poller, I was able to locate OIDs that show the client's information.
3) Aerohive seems to automatically append an @ at the end of the SNMP location string causing Solarwinds to create a new location for the Aerohive APs instead of combining them with the current Cisco APs in the matching location. I understand this is not a Solarwinds problem, but I was hoping something could be done about it from Solarwind's perspective.
I can setup custom polling to capture the SNMP information, but I would prefer integration into the Wireless views because that is what our support staff use (plus it's a decent wireless management interface).
Is there any chance Aerohive support could be extended in NPM or is it possible for me to setup custom polling such that the Wireless views will show the APs and connected clients just like it does for our Cisco APs?