Alerting for node reboot where node rebooted between status intervals
Here is what I am trying to do. I need a way to capture nodes that have entered fast poll but have not gone down as per the polling interval. I have nodes that reboot faster than their polling interval...
View ArticleCustom Linear Gauge
I added the MIB of the APC PDUs as a Universal Poller and made a transformation to where {customApms} * 0.1 provided the correct number to be displayed. I was able to add that to my Orion Web page...
View ArticleClik here to view.
Polling interval for a specific volume not changing?
In NPM, I'm trying to monitor the disk utilization of a particular volume, but I would like change the statistics gathering from 30 minutes to 15. However, when I attempt to edit that specific volume...
View ArticleSQL Licensing
We recently purchases the Solarwinds NPM and Netflow Traffic Analyzer software. We are now in the process of ordering a license for MS SQL 2008 Standard. My question is do we need mulitple CALs being...
View ArticleNetwork Discovery finds no devices
I'm having a pretty strange issue. I have a few distributions I want to scan for devices but I only want to scan 5-15 subnets per distribution. I have 5 SNMP strings, 1 set of VMware credentials, and 3...
View ArticleClik here to view.
installing orion npm
hello all, i have installed SolarWinds-Orion-NPM-v10.4.1-Eval-RegistrationRequired into a server.. i did the ff: 1. installed a dotnet frame work 3.5 or higher2. add IIS role3. installed npm setup in...
View ArticleTell us your "Unknown" devices!
Sometimes devices show up in Orion as "unknown". Those devices need to be added to our SysObjectID database. We know about lots of them, but we'd like to hear which items you need. We...
View ArticleNeed report that shows multiple split timeframes
I need to produce a report that shows utilization between the hours of 0600-1800 and 1800-0600 for the entire month.The report must show monthly average and peak for 0600 thorough 1800 and 1800 through...
View ArticleMonitoring maximum bandwidth usage
My boss goes on and on about maxiumum bandwidth usage and how long the pipe is at max usage. I tell him that 95th percentile is a good metric but he is not satisified How in NPM or NTA can i see or...
View ArticleClik here to view.
Cisco Serial Number Universal Device Poller & Report
Cisco Serial Number Universal Device Poller.Start > All programs > SolarWinds Orion> Network performance Monitor> Universal Device Poller. Click “New Universal Device Poller” Type the...
View ArticleWHAT WE ARE WORKING ON POST NPM 10.5
Because NPM 10.5 has been released recently we are already working on the next release of NPM. Here is a preview:Web based reporting UI with new "out of the box" reports with chartsReports that will...
View ArticleMonitor power supplies...
Hello AllI would like to monitor my Cisco Switches Power Supply status. I have two UnDP's added :Power Supply - 1.3.6.1.4.1.9.9.13.1.5.1.3 Fan - 1.3.6.1.4.1.9.9.13.1.4.1.3Actually one of our Cisco...
View Articlemonitoring cisco ucs
I am using npm 10.3 and tring to onitor cisco ucs fabric interconnects and blades. I have 2 fabric interconnects and one cluster ip. i added all 3 ips. but when i go to each ip, i only see one switch...
View ArticleIssue with Cisco MDS 9513 reporting non-existent sensors in warning/up state
I started to see an issue about a week ago where one of our Cisco MDS 9513 started to report power supply issues across 34 different sensors. The problem I am running across though, is that all 34...
View ArticleInterface physical address changed?
Hi! I upgraded my four Nexus 5000 switches to the newest firmware (5.2(1)N1(1)), but after that I have started to recieve a massive amout of Event Messages like this one: "Nexus#1 - Ethernet1/11 · *...
View ArticleClik here to view.
Does APM_HardwareItems table have current updated values?
I would like to know if the above mentioned table does have the current value for the hardware. I'm looking to put together a report that shows the current utilization of the power supplies to check...
View ArticleClik here to view.
Clik here to view.
Alert when ESX Status in equal to UP
Has anyone successfully done this before?polling I submitted a ticket and they said that this will need to be a custom sql alert because there's no template made for it yet.
View ArticleAdv Alerts based on Syslog messages?
I'm still running 8.1 - FYI. Can 8.5 be utilized to create an advanced alert based on syslog messages received by Orion? How about Orion Events? The ability to generate alerts based on context...
View Article