Upgrade to NPM 10.4.2 causing new alerts looking how to adjust

I just installed NPM v10.4.2 and i am receiving the below alerts that i was not receiving prior to the upgrade.. I placed an example below of the current hardware health from one of the nodes. Is there a way to adjust the warning level on fans or other parts of the OID that references specific sections of the OID.. I have been unable to locate a section in Solarwinds where i can adjust the setting. And since fan speeds fluctuate it would be nice to be able to have solarwinds recognize those fluctuations without having to alert. any help would be appreciated..

Current Hardware Health

Fan

Jseries CPU fan 0Running

Jseries CPU fan 1Running

Jseries IO fan 0Running at full speed

Jseries IO fan 1Running at full speed

Jseries Mem fanRunning

Power Supply

Temperature

4/1/2013 4:39 PM		Hardware sensor Fan 3 of hardware health monitoring on ESWNYCDCR02-1 is warning
	4/1/2013 4:39 PM		Hardware sensor Fan 2 of hardware health monitoring on ESWNYCDCR02-1 is warning
	4/1/2013 4:39 PM		Hardware sensor Fan 1 of hardware health monitoring on ESWNYCDCR02-1 is warning
	4/1/2013 4:39 PM		Hardware sensor Fan 3 of hardware health monitoring on ESWNYCDCR02-1 is up
	4/1/2013 4:39 PM		Hardware sensor Fan 2 of hardware health monitoring on ESWNYCDCR02-1 is up
	4/1/2013 4:39 PM		Hardware sensor Fan 1 of hardware health monitoring on ESWNYCDCR02-1 is up